昆信机械
咨询热线:400-0000-000

SJ-E130/140
    Publish time 2015-05-08 16:41    

Die Cutting Plastic Recycling Machine



Die Cutting Plastic Recycling Machine


     The SJ series vertical water ring granulated plastic extrusion granulator is suitable for two or three order exhaust type extrusion granulator. The grain cutting part is made up of water ring cutting die, flexible cutter holder, vertical dewatering device, vibration separation screen, air delivery system, aggregate door and so on. The traditional plastic recycling granulator granulation technology is extrusion melt strand after cooled after cutting, and straight cut water ring cutting plastic extruder is a new type of machinery in direct water solution under cutting, molten material cut relatively solid cutting has obvious advantages.

1)Because the plastic is in the melt state was scraped and the blade cooling water solidification, different viscosity of the polymer can be used in the cutting form, the formation of any dust particle cutting will not melt under the condition of good quality cutting and slicing, regular shape, convenient packaging and transportation;

2)According to the amount of extrusion, it can automatically match and adjust the output and cutting speed of the die head to change the size of the kernels, or manually adjust the number of knife holders (up to 4 pieces) to change the size and shape of the kernels.

3)The direct cut water ring cutting particles cut the plastic melt directly and cooled, after high speed dehydration, it can effectively remove the moisture of the finished particles, and the drying effect is good. There are vibrating screens in the following process, and the particles are filtered by grade, and the coarse material is automatically discharged. The granulation process is automated and the operation is more convenient.









Mainly technical parameters:
Model SJ-E130 SJ-E140
Screw Diameter  Φ130 Φ140
Screw Diameter Ratio 22:1 22:1
Screw Speed  10-110r/min 10-110r/min
Main motor  55KW 70KW
Extruding Capacity  150kgs/h 200kgs/h
Machine Weight  3T 3.5T
Overall dimension (L*W*H) 8800*1800*1800mm 9800*1800*1800mm
Power Supply  380V 3-phase  50Hz


 

Client notice :
   1.What is the material you need to print (plastic film)?
   2.
What is the maximum and minimum size and thickness of the printed product you need?
   3.What is the use of the product you need for packaging, bag, or sheet?
   4.The requirements of the product you need are high, and the quality of the product is very high.

Technical support:
    1.
Special needs , customers can be processed according to specific requirements.
   2. After the sale of the equipment, technical personnel will be sent if reqeust of installation . the cost would be bear on buyer . 
   3. Be responsible for the operation and maintenance training for the relevant personnel of the demand side. Client can be sent technical to factory .
   4. Long-term supply the selling spare parts  . 
   5. Provide technical consultancy service for a long time.


 


Related products: